Foundation Repair
Do you have foundation problems? Just like in every other part of life, preventive maintenance is more economical than a total overhaul. The same applies for foundations. If you neglect the warning signs today, the cost could increase dramatically tomorrow.
Foundation Inspections
You can avoid foundation problems by keeping a close eye on any issues, which you can do by performing regular foundation inspections by either a foundation repair specialist or a structural engineer. It’s an easy way to see what’s going on with your home’s foundation.
Foundation Maintenance
Most of these problems can be prevented with good foundation maintenance. While you should always have a professional foundation repair specialist take care of the big jobs, it’s up to you to maintain and inspect your foundation on a regular basis so you can find any problems early on.
Crack Identification
Foundation cracks can be classified as either structural or non-structural. There’s a big difference between the two, and their consequences differ greatly. One is superficial in nature, which will be less severe. The other one is more deeply rooted and can be more damaging.
Polyurethane Foam
The polyurethane foam injection process begins by drilling small holes into the concrete foundation of your property and pumping the foam mixture through tubes. The foam enters the empty spaces beneath your foundation and rapidly expands, lifting the concrete until it reaches its proper level.
Mudjacking
Mudjacking is a relatively swift and noninvasive way to bring uniformity back to your concrete slabs. If your home or property is suffering from uneven patios or walkways, then contact us about fixing your problems. One of our foundation repair consultants can assess your property and, if needed, offer you a long lasting and affordable solution.
Void Fill
Voids are one of the most misunderstood parts of our business. 95% of all voids are caused by lifting a foundation using piles. When a structure is lifted 3 inches, then it will have a 3 inch void underneath. This new atmosphere will start working on exposed parts of the unsupported structure.
What You Need To Know
Are you in the process of buying a new home? If so, you should pay attention to this warning about that work that is commonly done for perspective buyers and the need to hire your own foundation company to perform the inspection.
General Foundations FAQs
Foundation problems in Corpus Christi and South Texas are often connected to soil movement, drainage issues, moisture changes, and the type of soil beneath the structure. Coastal sands and sandy loams can shift and erode, while upland clays and clay loams are known for shrink-swell movement. When these soils expand during wet periods and contract during dry periods, they can place stress on a home’s foundation.
Foundation inspections help identify early warning signs before they become more serious and expensive. A foundation repair specialist can look for cracking, movement, settling, drainage problems, and signs of soil-related stress around the property. Regular inspections are especially helpful in South Texas, where changing moisture levels can affect the ground beneath a home.
Homeowners should watch for cracks, uneven floors, sticking doors or windows, and drainage problems around the home. It is also important to keep water from pooling near the foundation and to monitor soil conditions during long dry spells or heavy rain. Good foundation maintenance can help reduce movement caused by shrinking, swelling, or eroding soil.
Some cracks are non-structural and may be more superficial, while others can point to deeper foundation movement. Cracks that widen, spread, appear near doors or windows, or form stair-step patterns in brick should be inspected by a professional. Crack identification helps determine whether the issue is cosmetic or related to structural movement.
Polyurethane foam injection is commonly used to lift and level sunken concrete. Small holes are drilled into the concrete, and expanding foam is pumped beneath the slab to fill empty spaces and help raise the surface. This can be useful for concrete affected by voids, settling, or unstable soil conditions.
Mudjacking is a concrete leveling method used to raise uneven slabs, sidewalks, patios, driveways, and walkways. It is a relatively swift and noninvasive way to restore a more level surface without replacing the entire slab. For properties with uneven concrete, mudjacking may provide a long-lasting and affordable solution.
Voids can form when soil washes out, settles, shifts, or when a foundation has been lifted during repair work. In South Texas, sandy soils may be more vulnerable to erosion, while clay soils can shrink during dry weather and leave unsupported spaces beneath concrete. These voids can create stress on the slab or foundation if they are not addressed.
Void fill helps restore support beneath a foundation or concrete slab. When empty spaces are left under a structure, parts of the foundation may become unsupported and more vulnerable to cracking or movement. Filling those voids can help protect the structure and reduce the risk of future damage.
Upland clays and clay loams can be highly expansive. They become sticky and swollen when wet, then hard and contracted when dry. This shrink-swell cycle can cause foundations to move, settle, crack, or shift over time, which is why drainage control, maintenance, and early inspections are so important.
If you are buying a home, it is smart to hire your own foundation company to inspect the property. Do not rely only on general information provided during the buying process. A professional foundation inspection can help you understand existing damage, previous repairs, soil-related risks, and whether additional work may be needed.